4 displaying program version no – Furuno PG-1000 User Manual
Page 19
Advertising
12
4. Disconnect the power cable off from the
equipment, and then reattach it.
5. Mount the equipment at the previous posi-
tion, referring to page 3.
3.4
Displaying Program
Version No.
When the equipment is powered on, the pro-
gram no., denoted by LEDs in binary notation,
is shown about 1 second.
For example, LED state shown below means
the program no. is 5.
AUTO
TRUE
CALIB
STATUS
: On
: Off
8
4
2
1
Figure 24 LED state and
program version no.
Advertising