FujiFilm FinePix BL00677-200(1) - Manual (Page 126)

126
Installation on a Windows PC
Pre-installation checklist
Z Hard ware (software) requirements and recommended system
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
* 1 Models with one of the above operating systems pre-installed.
* 2 When you install the software, login using a system administrator account (e.g. “Administrator”).
CAUTION
• Additional USB interface board is not guaranteed.
• Windows 95, Windows 98 and Windows NT cannot be used.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
• When you reinstall or remove FinePixViewer, the Internet menu and your user ID and password for the FinePix Internet Service
are deleted from your PC. Click the [Register now] button, enter your registered user ID and password and download the menu
again.
requirement Recommendation
Operating System * 1
Windows 98 SE
Windows Millennium Edition (Windows Me)
Windows 2000 Professional
* 2
Windows XP Home Edition * 2
Windows XP Professional * 2
Windows Vista * 2
Windows XP Windows Vista
CPU
200 MHz Pentium minimum
(Windows XP/Vista users: 800MHz Pentium 4 or better recommended) 2 GHz Pentium
4 or better 3 GHz Pentium
4 or better
RAM 128 MB minimum (512 MB minimum for Windows Vista) 512 MB or better 1 GB or better
Hard disk space
Amount required for installation: 450 MB minimum
Amount required for operation: 600 MB minimum 2 GB or better 15 GB or better
Display
800 × 600 pixels or better, 16-bit color or better 1024 × 768 pixels or better,
Highest (32 bit)
126