FujiFilm FinePix BL00677-200(1) - Manual (Page 56)

56
Setting the Shooting Mode
N Program AE
This is an automatic mode to specify the settings except
for the shutter speed and aperture setting.
This is a simple way to take pictures the same as the <
Aperture-priority Auto and M Shutter-priority Auto modes
(Program shift).
Photography functions:
• [
PHOTOMETRY] ( ➝p.78)
• [T WHITE BALANCE] ( ➝p.79)
• [ CONTINUOUS] (
➝p.81)
• [H FOCUSING] ( ➝p.84)
• [ AF MODE] (
➝p.86)
• [G SHARPNESS] ( ➝p.88)
• [ FLASH] ( ➝p.88)
• [ BRACKETING] (
➝p.89)
CHECK
See p.67 for information on the available flash modes.
Z Program shift
MEMO
• Program shift can be used when Suppressed flash
( ➝p.67) is set in flash mode.
• The shutter speed and aperture setting appear in yellow
when the camera is in Program shift mode.
• Any of following cancels Program shift:
- Changing the Mode dial setting
- Setting the camera to Playback mode
- Turning the camera off
- Popping the flash up
CAUTION
Set the Mode dial to N.
PROGRAM SHIFT PROGRAM SHIFT
ISO 100 ISO 100
F3 F3. 5 60 60
A Press D to open the setting screen.
B Select different shutter speed and aperture
setting combinations without changing the
exposure setting.
C Press the shutter button to take pictures.
SET SET
ISO 100 ISO 100
When the brightness of the
subject is outside the camera’s
brightness metering range, [---]
appears as the shutter speed and
aperture setting on the screen.