FujiFilm FinePix BL00677-200(1) - Manual (Page 76)

76
[p-MODE MENU] (Photography)
Changing the quality setting
([
QUALITY])
Use this menu to specify the image size (number of
recorded pixels).
Select the quality setting for the scene being shot.
Z Quality settings in Photography mode
Area shot and quality setting
Normal shooting provides an aspect ratio of 4:3 and %
shooting provides an aspect ratio of 3:2 (same aspect ratio as
35 mm film and post card).
MEMO
• The bigger the number of recorded pixels, the better the
image quality becomes. As the number of recorded
pixels becomes smaller, you will be able to record more
frames to a Memory Card.
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• When changing the quality setting, the number of
available frames also changes ( ➝p.154). The numbers
to the right of setting show the number of available
frames.
• The quality setting is fixed to ` when photography
mode is set to ( ➝p.54).
• [ ISO] is limited to 1600 when [ QUALITY] is set to
i or %. The [ ISO] setting automatically changes
and is displayed in yellow in the LCD screen. When
[
QUALITY] is set to other than i or %, the
restriction is cleared.
Quality mode Sample uses
i F (3264 × 2448)
i N (3264 × 2448) Printing at up to 10R (25.4 × 30.5 cm/
10 × 12 in.) / A4 size / A3 size
For better quality, select i F
% (3264 Ч 2176)
4 (2304 Ч 1728) Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
2 (1600 × 1200) Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
` (640 × 480) To use for e-mail or web site
12 12/ 31 31/ 2050 2050 10 10: 00 00 AM AM 12 12/ 31 31/ 2050 2050 10 10: 00 00 AM AM 12 12/ 31 31/ 2050 2050 10 10: 00 00 AM AM 12 12/ 31 31/ 2050 2050 10 10: 00 00 AM AM
AUTO AUTO
Area shot excluding % Area shot with %
Setting the menu (
➝p.72)