FujiFilm FinePix BL00677-200(1) - Manual (Page 88)

88
[SHOOTING MENU]
Adjust the image outline (hard/
soft) ([G SHARPNESS])
Available Photography modes: N, <, M, >
Use this setting to soften or emphasize the outline and
quality of an image.
Adjust the amount of light
emitted by the flash
([
FLASH] (Brightness
Adjustment))
Available Photography modes: N, <, M, >
Use this setting to change the amount of light emitted by
the flash to suit the photography conditions or to achieve
a desired effect.
CHECK
Compensation range:
•
– 2/3 EV to +2/3 EV in approx. 1/3 EV increments (total:
5 levels selectable)
• Explanation of Terms “EV” ( ➝p.156)
CAUTION
• Depending on the type of subject and the shooting
distance, brightness adjustment may have no effect.
• The image may appear dark when setting the shutter
speed to higher than 1/1000 sec.
[HARD]:
Emphasizes the outlines.
Best for shots of subjects
such as buildings or text
where sharp images are
desirable.
[STANDARD]:
Best for ordinary
photography. Provides edge
sharpness that is ideal for
most picture taking situations.
[SOFT]:
Softens the outlines. Best for
shots of subjects such as
people, where a softer image
is desirable.
SHOOTING MENU SHOOTING MENU
SHARPNESS SHARPNESS
HARD HARD
STANDARD STANDARD
SOFT SOFT
FLASH FLASH
SET SET - - UP UP
BRACKETING BRACKETING
SHOOTING MENU SHOOTING MENU
FLASH FLASH
0
AUTO AUTO
-
1/3
-
2/3
+
1/3
+
2/3
+ 0
-
SET SET - - UP UP
BRACKETING BRACKETING
SHARPNESS SHARPNESS STD STD
Setting the menu (
➝p.72)