FUJITSU XG0224 - Manual (Page 41)

XG0224 Hardware Guide Chapter 2 Installation
Connecting to a Setup PC 41
2.4 Connecting to a Setup PC
This is to connect a set up PC to the console port of the switch using RS232C cable.
Necessary Hardware / Software
Please prepare the hardware & software specified below to connect to the switch.
• Personal Computer
1 unit of personal computer for setting up configuration is required.
• RS232C crossover (null modem), D-SUB9F to D-SUB9F cable
A RS232C cable is required to connect the set up PC to the switch.
A RS232C crossover cable is not provided with the switch.
The console cable adapter which is included in this product is used with the RS232 cable to connect the set up PC to
the switch.
• Communication Software
Terminal emulation software is required.
Connect RS232C Cable
1. Confirm power of both the PC and the switch are off.
2. Connect the RS232C cable and the console cable adapter which is included in this product, and
firmly fix them with the screw.
3. Plug in the RJ45 plug of the console cable adapter to the console port of the switch.
Reference User’s Guide "1.1.5 Console Port Specifications" (pg.29)