FujiFilm A400 - Manual (Page 116)

116
Specifications
Input/Output Terminal
VIDEO OUT (Visual output) NTSC/PAL-type
Digital input/output USB
DC input socket AC Power Adapter AC-3VX (sold separately)
Power Supply and Others
Power supply Use one of the following:
• 2×AA-size alkaline batteries
• 2×AA-size Ni-MH (Nickel-Metal Hydride) batteries (sold separately)
• AC power adapter AC-3VX (sold separately)
Guide to the number of
available frames for battery
operation
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
When using alkaline batteries, use the batteries supplied with the camera. You can use Ni-MH batteries
also. The storage media should be xD-Picture Card.
Pictures should be taken at a temperature of +23°C (+73°F), with the LCD monitor turned on, the optical
zoom moved from full wide-angle to full telephoto (or vice-versa) and back again to its original position
every 30 seconds, the flash used at full power every second shot and the camera turned off and then on
again once every 10 shots.
• Note: Because the number of available shots varies depending on the capacity of alkaline batteries or
the level of charge in Ni-MH batteries, the figures shown here for the number of available shots
using batteries are not guaranteed.
The number of available shots will also decline at low temperatures.
Camera dimensions (W/H/D) 93.0 mm × 60.0 mm × 27.5 mm/3.7 in. × 2.4 in. × 1.1 in. (not including accessories and attachments)
Camera mass (weight) Approx. 126 g/4.4 oz. (not including accessories, batteries and xD-Picture Card)
Weight for photography Approx. 174 g/6.1 oz. (including batteries and xD-Picture Card)
Operating Conditions
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
Battery Type Number of frames
Alkaline batteries Approx. 100 frames
Ni-MH batteries 2500 mAh Approx. 400 frames