FujiFilm A400 - Manual (Page 90)

90
Connecting to a PC
By connecting the camera to a PC, your system can be expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and file management etc.
If the power cuts out during data transmission, the data will
not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
A Insert the xD-Picture Card with images into the
camera ( ➝p.18).
• Do not format the xD-Picture Card in the camera on the
PC.
• Use the xD-Picture Card with images taken by a
FUJIFILM Digital camera.
B Press w for about 1 second to
turn the camera on in Playback
mode.
C Press MENU/OK to display the
SET-UP menu.
Refer to “Using the SET-UP
menu” (
➝p.70).
CD-ROM
(Software for FinePix BZ)
Refer to Software
Installation (
➝p.84, 87)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
D Select @ DSC in L USB
MODE in the SET-UP menu
(
➝p.72).
E Press POWER to turn the
camera off.
F Turn your PC on.
G Connect the camera to your PC using the USB cable
(mini-B).
H Press w for about 1 second to
turn the camera on in Playback
mode.
USB MODE
THIS MODE IS FOR
SENDING IMAGE DATA
TO PC.
SET CANCEL
PICTBRIDGE
DSC
; USB
socket
(mini-B)
AC-3VX
(sold separately)