FujiFilm A400 - Manual (Page 71)

71
Settings
SET-UP menu option
Setting Display Factory default Explanation Page
1
IMAGE DISP. ON/OFF ON
Specifies whether an image checking screen
(photography result) appears after taking a picture.
The image is displayed for a few moments and then
recorded. The color tones in images recorded may
differ from actual color. Play back the recorded
images to check them.
–
§ BEEP LOW/HIGH/OFF LOW
Sets the volume of the tone emitted when the
camera controls are used.
–
FRAME NO. CONT./RENEW CONT.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
73
q LCD ON/OFF ON
Specifies whether the LCD monitor is ON or OFF
when the camera is turned on in Photography
mode.
–
2
DIGITAL ZOOM ON/OFF OFF Specifies whether degital zoom is used together. 74
AUTO POWER OFF 2 MIN/5 MIN/OFF 2 MIN
Sets the time of turning camera off when camera is
not used.
75
LCD POWER SAVE ON/OFF ON Darkens the LCD monitor when camera is not used. 75
FORMAT OK –
Initializes an xD-Picture Card or internal memory.
Select this menu to erase all the frames (files).
75
How to use the SET-UP menu ( ➝p.70)
Continued