Falcon Graphics RJ-6000 Series - Manual (Page 63)

According to the printing environment to be used, three speeds can be speci-
fied for a RJ-6000 Series printer.
In changing them, you should consider the resolution and printing time
required for the printing.
By changing the printing mode, printing may be high quality, normal or high
speed.
* High Quality Printing Mode: The high quality lamp is lit. The printing is
better than normal printing mode but the
printing speed is slower.
* Normal Printing Mode: This is the ordinary printing mode. The
normal printing mode lamp is lit.
* High Speed Printing Mode: Printing speed has priority. The high speed
lamp is lit. Use it for check printing.
When the printing mode is altered, the LED of the selected mode lights up.
Step 1
Press the [QUALITY / SPEED] key once or twice until LED for the desired
printing mode is lit.
Step 2
When the printing mode changes, the LED of the selected mode changes to lit.
High Quality Printing, Normal Printing, High Speed Printing
62 RJ-6000 Series USER GUIDE Basic Edition
For high quality mode For normal mode For high speed mode
: Lit
: Not lit