Falcon Graphics RJ-6000 Series - Manual (Page 84)

Step 3
Insert a new cutter blade in the hole in
the head. Press down on the cutter
while you return the cutter arm over the
cutter. The cutter will only fit in one
direction.
• The cutter blade is very brittle. Be careful not to bump it or
drop it.
Step 4
Be sure to return the head to the right by hand before switching on the power.
• Cutter life will vary according to the type and thickness of the
media and the usage environment, so you should always keep
a spare cutter blade handy.
83 RJ-6000 Series USER GUIDE Basic Edition
Replacing the Cutter
Daily Maintenance
CAUTION
NOTE