Resetting the change filter light, Important – FilterStream Ultra High Efficiency Air Purifier HW_A710 User Manual
Page 14

Page 12
AirTamer®
IMPORTANT:
There are different grades and types of AirTamer® AIR FILTERS and the
estimated replacement time varies from one type to another.
Please look at your AIR FILTER frame for the recommended time to replace.
The following is a quick summary:
Model
Replace After
AF2-1620E
AirTamer® High Performance Electrostatic Pleated Filter
6 Months
(Normal Use)
AF2-1620M
AirTamer® Ultra High Performance Pleated Filter
12 Months
(Normal Use)
AF-1620AM
AirTamer® Germ-Odor-Virus Protection Air Filter
3 Months
(Normal Use)
If you are using an AIR FILTER with a twelve (12) month life, like the AF2-
1620M Ultra High Performance Pleated Filter included with your A710
AirTamer, simply use the AIR FILTER for two (2) – ChANGE FILTER LIGhT
cycles (i.e. use the FILTER for six (6) months, reset the ChANGE FILTER
LIGhT, then use the FILTER for another six (6) months). You can mark the
date to change the FILTER by checking off the corresponding box on the
FILTER FRAME.
NOTE:
for filTers WiTh a 3 moNTh life, mark The daTe To
chaNge The filTer by checkiNg The correspoNdiNg
box oN The filTer frame.
Resetting the Change Filter Light
To reset the orange ChANGE FILTER LIGhT to the beginning of its 6 month timer:
Press and hold the
1.
FILTER BUTTON for three (3) seconds.
All of the lights on the unit will flash once and the filter light will be
2.
reset. It will change back to orange after six (6) months of use.
HW_A710_UserMan_ENG_05.indd 12
5/14/09 9:04:18 AM