Set-up & operation, Unit set-up – FilterStream Ultra High Efficiency Air Purifier HW_A710 User Manual

Page 9

Advertising
background image

Page 7

makes life better!

Set-Up & Operation

Unit Set-Up

Unpack the unit and make sure that any and all tape and protective

1.

wrap is removed from the unit.

NOTE:

your airTamer® is shipped WiTh a cerTified airTamer®

air filTer iNsTalled iN The uNiT. please remove The air

filTer plasTic WrappiNg before firsT use.

Remove the

2.

AIR EXIT GRILL by pushing

down on the AIR EXIT GRILL TABS (2a)

and pulling the AIR EXIT GRILL away from

the unit (2b).
Remove the

3.

AIR FILTER by firmly gripping

the sides of the AIR FILTER and pulling the
AIR FILTER out of the unit.
Remove the plastic wrap protecting the filter.

4.

Mark the suggested month of

5.

AIR FILTER

replacement on the AIR FILTER by checking

off the appropriate month (e.g. If it is

suggested that the AIR FILTER be replaced in

twelve (12) months and you install the
AIR FILTER on January 1st, put a check in the

box beside the letter representing the month

to replace – in this case January, for the

next January).

2a

2b

3

5

HW_A710_UserMan_ENG_05.indd 7

5/14/09 9:04:17 AM

Advertising