Farenheit Technologies TID-360 - Manual (Page 10)

Page - 9
General Operations
Reset the Unit
In case the unit is malfunctioned or need to reset to factory default setting, press RESET button in
inner panel then the unit will be reset.
Power on/off
Press “POWER” button to turn on the unit.
Long press POWER button on front panel or press POWER button on RC to power off the unit.
Mode Setting
Press MODE button on front panel or remote control to change mode in a sequence of: Tuner
=>DVD =USB =>Memory Card =>TV=> AV IN=> Tuner
(When DVD/USB/ Memory Card available.)
Menu button
Press to enter MENU setting. Long Press Menu button on remote control can back to Main Menu.
Band button
In radio mode, press to select FM1-FM2-FM3-MW.In DVD mode, if playback mp3/wma files or
contents of multi folders
, press to move cursor right side, long press to move cursor
downside.
OK button
In playing DVD mode, short press to enter and confirm;
In playing Radio mode, short press to enter and confirm;
SEL button
In playing DVD mode, short press to select the audio setting.
In playing Radio mode, short press to select manual storage stations，long press to select the audio
setting
Volume Control
Turn the knob on front panel clockwise/ counter-clockwise or press VOL +/- button on remote control
to increase/ decrease the volume level.
MUTE Function
Short press POWER/MUTE button on the panel or press MUTE button on the Remote Control to
mute. Press it again to cancel mute.
Audio Setting
Press SEL button on the Remote Control to select the audio setting (or on front panel, long press
SEL button in radio mode, short press SEL button in other mode to select the audio setting)
BASS =>TREBLE => BALANCE => FADER => EQ.