Farenheit Technologies TID-360 - Manual (Page 15)

Page - 14
Random
Press the RDM button on remote to play all song tracks in random order. Press and hold for two
seconds to play all album tracks in random order. Press again to cancel.
Note: This function is only for audio files.
Intro Playback
Press the INT button on remote to play the beginning of every track for 10 seconds in sequence.
Press again to cancel INT play.
Note: This function is only for audio files.
Programming the Playback
1. Press PROG button on the remote open program menu.
2. Use / / / buttons to select the program position and use digit 0-9 buttons to select the
desired track.
3. Press PLAY/ PAUSE button to program play, or move the cursor to select PLAY and press
ENTER button on remote or OK button on front panel to play.
4. Move the cursor to CLEAR on program menu, press ENTER button on remote or OK button on
front panel to delete the programmed list.
5. Press PROG again to cancel program play.
Return Function (For video files and pictures only)
During playback of a video file or picture, press STOP button to return to the file list menu.
Selecting Different Audio Modes (only for MP4 files)
Press AUDIO button on the remote repeatedly to select the audio language.
Changing the Subtitle Language (only for MP4 files)
Press SUB-T button on the remote to select the preferred language for sub-title.
ZOOM (only for MP4 files)
Press ZOOM button and hold for 2 seconds on remote to activate zoom function in the following
sequences: ZOOM 2 => ZOOM 3 =>ZOOM 4 => ZOOM 1/2=>ZOOM 1/3=>ZOOM 1/4=>ZOOM
OFF.
Rotate Picture (only for picture files)
In picture mode, press / buttons to rotate picture 90 degrees.
System Menu
In USB/ Memory Card mode, press SETUP button on remote to show system menu. Press / / /
buttons to set system data, press this button again to save input data and exit system menu.
.