Farenheit Technologies TID-360 - Manual (Page 7)

Page - 6
Detachable Control Panel
Detaching the control panel
z Turn the Power off.
z Press OPEN button release the panel.
z Pull the panel out.
Attaching the control panel
z Insert the left side of the control panel into the main unit.
z Press the control panel right side until the “click” sound is heard.
Caution:
DO NOT insert the control panel from the right side. It can damage the control panel.
The control panel can easily be damaged by shocks. After removing it, place it in a protective case
and be careful not to drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important part.
Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Note:
If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in
isopropyl alcohol to clean the socket on the back of the control panel.