Freestyle Nomad - Manual (Page 19)

2. The chronograph will then be displayed in its current
sate – reset, running or stopped.
3. To resume a counting, press S1 button to resume from
where it left off.
4. To start a new counting, reset the chronograph to zero
first. Press S2 button to stop counting, then press and
hold S2 button for around 3 seconds to reset the
counter to zero.
FOR THE MEASUREMENT OF ELAPSED TIME
In CHRONOGRAPH mode,
1. Press S1 button to start counting.
2. To stop counting, press S2 button. Press S1 button to
resume from where if left off.
3. To reset to zero, press S2 button to stop counting, then
press and hold S2 button for around 3 seconds to
reset the counter to zero.
FOR THE MEASUREMENT OF SPLIT TIME AND LAP TIME
In CHRONOGRAPH mode,
1. Press S1 button to start counting.
2. While the chronograph is running, press S1 button once
to register a lap. Both the split time and lap time
will be displayed.
After 3 seconds, the currently accumulated split time
and lap time will be displayed.
3. Repeat the last step until all the laps have been
registered.
4. To stop counting, press S2 button. Press S1 button to
resume from where if left off.
5. To reset to zero, press S2 button to stop counting, then
press and hold S2 button for around 3 seconds to
20