Cleaning the pocket pc, Disposal and recycling, Liability – Fujitsu Siemens Computers Pocket LOOX N100 Series User Manual

Page 15: Ce marking

Advertising
background image

Important notes

Cleaning the pocket PC

Switch the Pocket PC off.

Pull the power plug out of the mains outlet.

or

Disconnect the USB charging cable from the Pocket PC.

!

Do not use any cleaning agents that contain abrasives or may corrode plastic.
Please ensure that no liquid enters the Pocket PC.

The device surface can be cleaned with a dry cloth.
If it is very dirty, you can clean the device and the display with a damp cloth.

Disposal and recycling

You will find further information about country-specific recycling and disposal options on the Internet
under www.fujitsu-siemens.com/recycling or on the CD supplied.

Liability

Fujitsu Siemens Computers GmbH cannot be held responsible for radio or television faults arising
from unauthorised changes made to this device. Fujitsu Siemens Computers is, furthermore, not
responsible for replacing and/or exchanging connector cables and devices which have not been
specified by Fujitsu Siemens Computers GmbH. The user is solely responsible for repairing faults
arising from such unauthorised changes made to a device and for replacing and/or exchanging
devices.

CE marking

CE marking for devices without radio component

The shipped version of this device complies with the requirements of the EEC
directives 89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low
voltage directive".

A26391-K197-Z120-1-7619, Edition 1

7

Advertising