Fujitsu Siemens Computers Pocket LOOX N100 Series - Manual (Page 36)

Operating the Pocket PC
Adjusting display lighting
Adjusting display lighting
You can make the display lighting of your Pocket PC lighter or darker. Reduce the display brightness
to save energy. In addition, you can determine how many minutes the display lighting will remain lit.
►
In settings, tap on the display symbol:
The window for the display settings will be displayed.
►
Set the display lighting in battery mode and/or with external power supply using the slide
control until the desired brightness is achieved.
► If necessary, set the desired duration of the display lighting in battery mode and with an
external power supply.
► Tap on to close the window and accept the settings.
Calibrating the display
The display of your Pocket PC is a touchscreen. To ensure that the touchscreen of your Pocket PC
reacts correctly when touched with the stylus, you will be asked to align the touchscreen after the
initial start-up.In settings, tap on the display symbol:
► Tap on the register card for the display.
► Tap on the Align Screen button.
► Touch the centre of the crosshairs that appears on the display with the stylus.
► This procedure must be repeated several times, whereby the crosshairs appear at different
locations on the display each time.
► Follow the instructions on the display.
28 A26391-K197-Z120-1-7619, Edition 1