Fujitsu Siemens Computers Pocket LOOX N100 Series - Manual (Page 21)

Operating the Pocket PC
3
1 2
► Connect the USB cable to the Mini-USB port of the Pocket PC (1).
► Connect the USB cable to the mains adapter (2).
► Connect the mains adapter to an electrical outlet (3).
The installed battery will now be charged. The power-on indicator flashes red.
You can use the Pocket PC during the charging process. This extends the charging time.
Charging the battery via a USB port
► Connect the USB cable to your Pocket PC.
► Connect the USB cable to the computer’s USB port.
i
The computer’s USB port must deliver no less than 500 mA of power. Because of the low
charging current, the charging process will take longer than it does using the power
adapter.
A26391-K197-Z120-1-7619, Edition 1 13