Firstech, LLC. CM4200 - Manual (Page 49)

- 49 -
1-Way 4 Button Remotes
With lock and unlock on the same button.
1. Enter programming by pressing:
a. The (lock/unlock) button, and the (start/stop) button
simultaneously until the parking lights flash once. This is
Menu 1.
b. The (lock/unlock) button, and the (query) button
simultaneously until the parking lights flash once. This is
Menu 2.
2. Tap the (trunk) button 3 times, waiting for a parking light flash
between each time.
3. The parking lights will flash three times, signaling that all of the
options have been reset, and that you have exited programming mode.
1-Way 4 Button Remotes
With separate lock and unlock buttons.
1. Enter programming by pressing:
a. The (lock) button, and the (unlock) button simultaneously
until the parking lights flash once. This is Menu 1.
b. The (lock) button, and the (start/stop) button simultaneously
until the parking lights flash once. This is Menu 2.
2. Tap the (start/stop) button 3 times, waiting for a parking light flash
between each time.
3. The parking lights will flash three times, signaling that all of the
options have been reset, and that you have exited programming mode.
R500A (CM1000A)
1. Enter programming by pressing the (trunk) button, and the (siren)
button simultaneously until the parking lights flash once.
2. Tap the (trunk) button three times, waiting for a parking light flash
between each time.
3. The parking lights will flash three times, signaling that all of the
options have been reset, and that you have exited programming mode.