FUJITSU VSS Hardware Provider 2.1 User Manual

Page 57

Advertising
background image

Chapter 8 Commands
8.3 Backup Control Command (stxvcopy)

ETERNUS VSS Hardware Provider 2.1 User’s Guide

Copyright 2012 FUJITSU LIMITED

P3AM-4582-03ENZ0

57

■

Execution example

●

When the OLU number is not specified

●

When the OLU number is specified

C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvcopy" 1 stop
STXV0317 INFO Copy session was stopped. Source-Disk = 1 Source-BoxID =
00E4000M3#####E430S20AU###MP4020738001## Source-OLU = 0x000b
Target-BoxID = 00E4000M3#####E430S20AU###MP4020738001## Target-OLU = 0x001f
stxvcopy successfully completed.

C:\>

C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvcopy" 1
stop -t 0x001f
STXV0317 INFO Copy session was stopped. Source-Disk = 1 Source-BoxID =
00E4000M3#####E430S20AU###MP4020738001## Source-OLU = 0x000b
Target-BoxID = 00E4000M3#####E430S20AU###MP4020738001## Target-OLU = 0x001f
stxvcopy successfully completed.

C:\>

Only a copy session of the specified source disk can be stopped.

•

When there are multiple QuickOPC sessions in the specified source disk, use the -t option to
specify the OLU number of the Shadow Copy destination for the target copy session to be
stopped.
Only the specified copy session is stopped.

•

When there are multiple copy sessions in the specified source disk for the SnapOPC+ stop
process, only the first generation of the SnapOPC+ sessions are stopped. Confirm that the copy
sessions to be stopped are the first generation of the SnapOPC+ sessions and check that no
backup is being performed before executing the SnapOPC+ stop process.

•

When this command is executed with the -f option for the QuickOPC stop process, the copy
session is stopped without waiting for the differential copy to be finished.

•

If this command is executed without the -f option for the QuickOPC stop process when a
differential copy is running, the copy session is stopped after the differential copy is finished

•

If an ETERNUS Disk storage systems hardware error occurs, this command is not executed.

Advertising