FUJITSU VSS Hardware Provider 2.1 - Manual (Page 72)

Chapter 8 Commands
8.10 Hyper-V Environment Setup Command (stxvhyperv)
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
72
■ Execution example
●
When setting the Hyper-V environment
●
When deleting the Hyper-V environment
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvhyperv" -s
stxvhyperv set successfully completed.
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvhyperv"
VSSHP has been set as a Hyper-V transportable copy.
C:\>
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvhyperv" -d
stxvhyperv delete successfully completed.
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvhyperv"
VSSHP is not set as a Hyper-V transportable copy.
C:\>
Do not execute this command in an environment in which a Hyper-V transportable copy is not
performed.