FUJITSU VSS Hardware Provider 2.1 User Manual

Page 91

Advertising
background image

Chapter 9 Messages
9.1 Event Log Messages

ETERNUS VSS Hardware Provider 2.1 User’s Guide

Copyright 2012 FUJITSU LIMITED

P3AM-4582-03ENZ0

91

■

Event ID: 2002

Type:Error

Messages:STXV2002 ERROR An invalid port number has been specified.

Details:

An invalid port number has been specified. The process is canceled.
Change the port number that was specified in the registry, and try again.

■

Event ID: 2003

Type:Error

Messages:STXV2003 ERROR VSSHP could not be connected to the backup server.

Details:

VSSHP could not be connected to the backup server. The process is canceled.
Check the following, and try again.

-

The IP address that was specified using the Communication Environment Setup function is valid.
To start the Communication Environment Setup function, click the [Start] button – [All Programs]
– [ETERNUS VSS Hardware Provider] – [Communication Environment Setup].

•

[For a Server Core environment]
Execute the "Communication Environment Setup Command".
For details, refer to

"8.8 Communication Environment Setup Command (stxvsetcommu)"

(page 64)

.

-

The port number that is to be used for the ETERNUS VSS Hardware Provider Communication
Server service is specified in the registry.

-

The ETERNUS VSS Hardware Provider Communication Server service is running in the backup
server.

-

The port that is used for the ETERNUS VSS Hardware Provider Communication Server service
is open in the security software being used, such as the firewall of the backup server.

■

Event ID: 2004

Type:Error

Messages:STXV2004 ERROR Timeout occurred.

Details:

Timeout occurred. The process is canceled.
Perform the following procedure, and try again.

-

Check the event logs of the backup sever, and take action according to the output error
message.

-

Check the status of the network line and there is no problem in the network.

Advertising