GE 45606 - Manual (Page 17)

Restoring Factory Defaults
All Configuration Parameters can all be restored to their factory default
settings by using your master controller to reset the device.
Interoperability with Z-Wave™ Devices A Z-Wave™ network can
integrate devices of various classes, and these devices can be made
by different manufacturers. Although every Z-Wave certified product
is designed to work with all other Z-Wave certified products, your
controller must include the appropriate device classifications in order
to control non-lighting Z-wave devices. As an example, the 45600
basic remote is designed only for controlling Z-Wave devices using
the lighting control classification. The 45601 deluxe remote with LCD
readout can control other Z-Wave certified devices like thermostats as
well as lighting.
WARRANTY
JASCO Products warrants this product to be free from manufacturing
defects for a period of two years from the original date of consumer
purchase. This warranty is limited to the repair or replacement of
this product only and does not extend to consequential or incidental
damage to other products that may be used with this product. This
warranty is in lieu of all other warranties, expressed or implied. Some
states do not allow limitations on how long an implied warranty lasts
or permit the exclusion or limitation of incidental or consequential
damage, so the above limitations may not apply to you. This warranty
gives you specific rights, and you may also have other rights which
vary from state to state. Please contact Customer Service at
800-654-8483 (option 4) between 7:30AM – 5:00PM CST or via our
website (www.jascoproducts.com) if the unit should prove defective
within the warranty period,
JASCO Products Company
Building B
10 E Memorial Rd. Oklahoma City, OK 73114