GE 45606 - Manual (Page 3)

This dimmer switch is designed for use only with
permanently installed incandescent lighting
fixtures. Do not use it to control fluorescent lighting,
transformer supplied lighting/appliances, motorized
appliances or receptacles. The incandescent lighting
controlled by this dimmer switch must not exceed a
total of 500 watts.
There are no user serviceable parts in this unit.
This device is intended for installation in accordance
with the National Electric Code and local regulations
in the United States, or the Canadian Electrical Code
and local regulations in Canada. If you are unsure or
uncomfortable about performing this installation
consult a qualified electrician.
CAUTION
Dimmer switch
LED light
Air gap switch