GE Digital Video Multiplexer Recorder - Manual (Page 20)

0150-0229D 20 Kalatel DVMRe StoreSafe
2.5 Recording
To begin recording, press the Record button. Recording will be indicated by the
LED located directly above the Record button. The unit always starts recording
at the end of previously recorded data. The unit will continue recording until the
record button is pressed again, unless Record Lock is ON.
Record Button
StoreSafe also remembers its current record mode in the event of power loss. If the unit was recording
during a power loss, then when power is restored the unit will put itself back in that mode.
Monitor Displays During Recording
Multiscreen Live and Playback displays on Monitor A and Monitor B are not affected by recording
operations.
LIVE
PLAY
BACK
PLAY
BACK
LIVE
LIVE
LIVE
LIVE
Monitor A Monitor B
Stop Mode
Playback Mode
Triplex Mode