12 motion detection – GE Digital Video Multiplexer Recorder User Manual

Page 44

Advertising
background image

0150-0229D

44

Kalatel DVMRe StoreSafe

Daylight Savings Time (Alternate Method)

{F}

To adjust the time one hour for daylight savings time, press the Function
button, then the Sequence button. If this function is activated during April,
one hour is added to the time. If this function is activated in October, one
hour is subtracted from the time. This function will only operate once per
time period.

Function and

Sequence Buttons

q Main Menu

→ Macro → Timed Macro Start

Use this menu to program scheduled start times for macros. Up
to 20 scheduled start times can be programmed in this menu.

Event: Select the scheduled start event you wish to edit.

Day: Select the start day (Monday – Sunday) of the macro.
Select ** (double asterisks) to run the macro every day.
Select None to cancel the scheduled start time.

Time: Select the start time for the macro.

Macro: Select the desired macro number.

A form is provided in section to keep track of scheduled macros.

3.12 Motion Detection

Use this menu to:

Enable motion detection on a per camera basis.

Activate individual zones in a scene to respond to motion
detection.

Activate the on-screen motion detection indicator.

Set motion detection as Activity detection or Intrusion Detection.

Configure the motion detection parameters on a per camera basis.

q Main Menu

→ Motion Detection → Enable/Disable Detection

Selecting Enable All or Disable All from this menu will activate or deactivate
motion detection on all cameras.

Selecting Individual Enable from this menu will bring up the following menu.

Individual Enable Menu

Use this menu to enable or disable motion detection on a per
camera basis. Rotate the Jog to navigate, and the Shuttle
to change the values.

Setup Parameters

Setup Active Zones

Indicate Detection

Enable/Disable Detection

Enable All

Disable All

Individual Enable

Timed Macro Setup

[CANCEL] [OK]

Event :

Day : Monday

Time : 00:00

Macro : 01

01

Detection Enable

[CANCEL] [OK]

Camera 01:

Camera 02: Disable

Camera 03: Enable

:

:

Camera 16: Enable

Enable

Advertising