1 disk analysis screen, 2 quick archive to cd, Write to cd – GE Digital Video Multiplexer Recorder User Manual

Page 58

Advertising
background image

0150-0229D

58

Kalatel DVMRe StoreSafe

5.1 Disk Analysis Screen

Begin by pressing the Search button. The Disk Analysis Screen will appear.
This screen shows a graphical representation of the recorded video stored on the
internal hard disk.

Search Button

Disk Analysis Screen

Alarm Event Activity Videoloss Present Absent

Hit SEARCH again to enter Advanced Search

Level 1

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

01/21/2002 20:17:01

02/28/2002 20:45:00

01/21/2002 20:17:01

Level 1

Disk Time
and Date
at cursor
location.

Arrow Cursors

Zoom
Level

Write to CD

Record

Button

Rotating the Jog moves the two arrow cursors across the representation of the recorded video. As the
cursors move across the screen the corresponding disk time is indicated in the upper right of the screen.
The video representations are color-coded by category. Rotating the Shuttle expands (Zooms) the
display. The Lowest level (most detail) is indicated on screen with an (L). Pressing the Enter button will
start Playback from the cursor location.

5.2 Quick Archive to CD

Archive to CD on the Disk Analysis Screen by selecting the time and date and pressing the record
button
. The QuickWave Setup must be set to ON from the Main Menu

Quick Wave Setup menu

(see section 3.15). The Archive Incident menu should appear.

6. Use the Jog to modify the time parameters and use the

Shuttle to move between the Start and Stop fields.

7. Press the Record button on the front panel when satisfied.

8. The CD Writer will open the CD tray when completed.

The video may now be viewed on any PC equipped with a CD-ROM.

Archive Incident

‘RECORD’ to Archive

07/31/2003 02:20:06P

Start Stop

02:20:09P

Capacity: 557MB

02:02:51P

Advertising