Programming – Graco Trabon LC-1000 User Manual

Page 6

Advertising
background image

Page 6

14540

LC-1000 Lube System Controller

Sample LC-1000 Program for Piston Distributor or Injector Systems

31 Point Piston Distributor System

DESCRIPTION

System Lube Volume: 99 cc (6.0 cu in) per hour
EO-3 Motor Driven Pump: 140 cc/min (8.5 cu in)
Total Piston Distributor Displacement: 4.62 cc/cycle
(.28 cu in)
Cycle Interval: 99 cc / 4.62 cc = 21.4 cycles/hr
60 min/21.4 cyc = 2.8 min (168 sec) per cycle
Cycle Switch (Pressure Switch) Transitions:
(1 transition/cycle) x 1 = 1
Pump Run Time: 4.62cc/140cc = .033min
(1.98 second)
Monitor Time: 1.98 sec x 2 (safety factor) = 3.96
seconds

Note: Due to the very short calculated pump run time,
use a 20 second monitor time.





PROGRAMMING

1. Initiate Programming Mode

a) Press “PRGM” Key – “ON” Icon blinks

2. “ON” (Monitor Period)

a) Press “ENTER” Key – ON TIME/COUNT blinks

b) Use S Key and X Key to set Monitor (“ON”)

Time to 0020

c) Press “ENTER” Key to accept value;
“SEC/MIN/HR/CNT”

blinks

d) Use S Key to scroll through choices;

select ” SEC”

e) Press “ENTER” Key to accept choice;

“OFF” Icon blinks

3. “OFF” (Pause Time)

a) Press “ENTER” Key –
OFF

TIME/COUNT

blinks

b) Use S Key and X Key to set

“OFF TIME” to 0168

c) Press “ENTER” Key to accept value;
"SEC/MIN/HR/CNT"

blinks

d) Use S Key to scroll through choices;
select

“SEC”

e) Press “ENTER” Key to accept choice;

“CYCLE” Icon blinks

4. “CYCLE” (Pressure Switch Transitions)

a) Press “ENTER” Key; CYCLE blinks

b) Use S Key and X Key to select 01

(1 pressure switch transition = 1 system cycle)

c) Press “ENTER” Key to accept value;

”PUMP” Icon blinks

5. “PUMP ON” (Pump Duty-Pulsed/Non-Pulsed)

a) Press “ENTER” Key;

"PUMP" (pulsed on time) blinks

b) Use S Key and X Key to set

”ON TIME” TO 00 (non-pulsed output)

c) Press “ENTER” Key to accept value;

LCD returns to “DISPLAY” mode

Programming is now complete. To verify lube se-
quence, initiate a manual lube cycle by pressing
“Manual Run” button.

VENT
VALVE

PUMP AND
RESERVOIR

VENT LINE

LUBRICATION

POINTS

PISTON

DISTRIBUTORS

PRESSURE

SWITCH

Advertising