5 print the default settings list, Print the default settings list – GateWay Fax Systems 90SI User Manual

Page 11

Advertising
background image

GateWay Fax Systems, inc.

Model 90si Secure Fax Gateway

User's Guide

www.gwfs.com, 877-951-9800, [email protected] help line: 877-951-9814

page 11

The following example shows how to change the default configuration to 2-Line Dual-Mode (defined as configu-

ration # 03)...

With the Secure Phone idle and only the Green "Power" light illuminated:

Procedure

Response

Press and hold

the Reset button

on the 90si

... until both the Green and Red lights extinguish, then...

release Reset

the Green light will be extinguished and the Red light illuminated

Take the fax off-

hook *1

(you will hear dial-tone)

Press 0 and then

3 on the fax dial

pad

you will hear a beep. (Note: 03 is the configuration code for 2-Line Dual-

Mode. See the above Default Settings list for Secure Only, and 1-Line

Dual-Mode.

hang up the fax

The Green light will blink a number of times. When it illuminated steady

the 90si will now be ready and in the 2-Line Dual-Mode configuration.

Notes:

*1 Most fax machines have a button that when depressed, returns dial-tone from the telephone system. This but-

ton is often labled Hook, Manual Dial, Monitor, On Hook Dial or something to that effect. Find and use this Hook

button on your fax or use the handset. If your fax does not have a handset or a hook button you will need to tem-

porarily connect a plain old telephone to the TEL jack on the back of the fax machine to change Default Settings.

2.5

Print the Default Settings List

Currently this feature is unavailable but will be provided to you, at no charge, in a future remote software up-

grade.

The factory Default Settings List is printed from the 90si to the attached COTS fax and looks like this.

90si Default Settings List:
Configuration (select one)
->(01)<- Secure Only (factory default)
(02) 1-Line Dual-Mode
(03) 2-Line Dual-Mode
Mode (select one)
(04) Half Duplex
->(05)<- Full Duplex
Protocol (select one)
(06) Async 2400 Bd
(07) Async 4800 Bd
->(08)<- Async 9600 Bd
(09) Async 19200 Bd
(10) Mil STD Handshake w/o FEC
(11) Mil STD Handshake w/FEC
(12) Mil STD Broadcast w/o FEC
(13) Mil STD Broadcast w/FEC
(14) Ricoh
(15) Compatable
Misc: (select any)
->(16)<- STE Connected
(17) OMNI, Sectera, vIPer, other Connected

Advertising