GateWay Fax Systems 90SI - Manual (Page 23)

GateWay Fax Systems, inc. Model 90si Secure Fax Gateway User's Guide
www.gwfs.com, 877-951-9800, [email protected] help line: 877-951-9814 page 23
SCIP Async (2.4, 4.8, 9.6 and 19.2 Kbps), MIL-STD-188-161 Sync Type 1, STANAG 5000 Type 1 (less 16kbps
and uncompressed), Modified Group 3 (Sync) - Compatibility & 3312 Modes (Sync), CCITT Group 3 (T30, T4).
Secure Fax Compatibility
Secure faxes made by: Cryptek, Ilex, Ricoh, TSP/GTE (now Gateway Fax Systems), AN/UXC-7, all MIL-STD-
188-161 and NATO STANAG 5000 faxes.
Regulatory Approvals
FCC Part 15/68, DISA JITC (Ft. Huachuca, AZ) re-certified 18 JAN 99
Environmental
Temp: 10 to 40 C, Humidity: 20-80% RH
Electrical
Input 5 VDC, 6.2 W max., 2.7 W idle.
External Power Supply
Input: 100-240 VAC Auto Sensing, 50-60 Hz, Output: 5 VDC, 4A Regulated, Phys: 4x2.5x1.7 in, .75 Lb, Regula-
tory: UL, cUL, CE
Physical
90si: 5.52” x 5.52” x 1.5” (WxHxD), 1 lb, 2.5 oz; shipping box: weight 3.5 Lb, 12.5” x 8.5” x 4.5”
Standard Warranty
1 year parts-and-labor
Included in the Box
90si with integral 6’ long shielded data cable w/DB-25F connector, 6’ long modular telephone cord, User’s and
Reference guides, power supply, AC power cord, adhesive velcro strip
Technical Support
Unlimited, free, technical support for 90si, whatever fax you use and your secure phone.
6.2 Digital Interface Specifications
The 90si’s digital interface cable is a 6’ long, shielded, RS-232 cable, captive to the 90si and terminated in a DB
-25 male connector. The ten pins that the 90si uses are described below. The remaining pins are un-terminated,
even if the pin positions are not. Output drivers provide +/- 6 VDC with 3K ohm loads on all outputs.