0 getting started, 1 introduction, 2 what in the box – GateWay Fax Systems 90SI User Manual

Page 4: Getting started, Introduction, What in the box

Advertising
background image

GateWay Fax Systems, inc.

Model 90si Secure Fax Gateway

User's Guide

www.gwfs.com, 877-951-9800, [email protected] help line: 877-951-9814

page 4

1.0 Getting Started

1.1

Introduction

What's New

In 2010 we began shipping 90si's with a number of new features including the SCIP Interoperable Async Secure

Fax Protocol or Async for short. This protocols allows the 90si to communicate with all other Async capable se-

cure fax using STE, OMNI, Sectera and other SCIP capable cryptos in Async Secure Data Mode. We also elimi-

nated the DIP switches (on the bottom of the old units) used for setting the transmit protocol and configuration.

Now, the user sets the default configuration and protocol using the attached fax's dial pad. The last major change

is the addition of a remote software/firmware upgrade mechanism.

General Description and Benefits of the 90si

The 90si Secure Fax Gateway allows any current or future commercial fax device to connect to a STE, OMNI,

Sectera or other cryptographic device. That leaves the choice of facsimile features in your hands. You choose the

fax that best suits your needs, such as: toner or ink-jet, multi-functin or fax only, portable, high-volume/low-vol-

ume, computer-based fax, whatever you like !! The 90si also preserves your choices for the future by allowing

you to easily and economically upgrade your fax machine as technology and requirements change or if your old

fax simply wears out, as they all will. With all-in-one secure faxes, you must throw away your investment in the

secure fax protocols (the 90si like electronics that they build into their faxes) along with the fax machine. Be-

ing an external device, you retain your investment in the 90si and replace only the COTS fax machine (at COTS

prices) when necessary.

Thank you for your purchase of the 90si Secure Fax Gateway.

1.2

What in the Box

Before you install the Easy-Fax 90si STU-III Gateway, make sure that you have received the following items:

90si Main Unit

AC Power Supply

AC Power Cord

Phone Cord

Additional items required for your 90si secure fax system are:

1.

a COTS fax machine or a computer with fax capability

2.

an operational STE, OMNI, SECTERA, STU-IIB or other cryptographic device.

3.

on outside phone line.

Advertising