GateWay Fax Systems Easy-Fax 90si User Manual
Page 5
90si Reference Guide
GateWay Fax Systems, Inc., www.gwfs.com, 1-877-951-9800
page 5/13
1.3
AT&T / Lucent / General Dynamics SDD 1900
Objective:
To set Secure Data Mode for 9.6 Kbps, Full Duplex, Synchronous, 8
Data Bits.
While On or Off-Hook, READY on or off:
Press
Display
MENU
MAIN MENU / Secure Data
SELECT
Ex. SD:9.6 H, ASYNC,8 / 2.4 Full Duplex
NEXT (until...)
9.6 Full Duplex
SELECT
Ex. SD:9.6 F, ASYNC,8 / async
NEXT
SD:9.6 F, ASYNC,8 / sync
SELECT
SD:9.6 F, SYNC,8 / previous menu
MENU
On-Hook / Push Ready
Objective:
To set MODEM; OUTPUT to -6 dBm and CONFIG to TRELLIS (*1)
While On Hook and with Master CIK inserted:
Press
Display
MENU
MAIN MENU / Secure Data
NEXT (until…)
MAIN MENU / Change Config
SELECT
CHANGE CONFIG / Security Config
NEXT (until...)
CHANGE CONFIG / Network Config
SELECT
NETWORK CONFIG / Common Rining
NEXT
NETWORK CONFIG / Modem Output
SELECT
MODEM OUTPUT / Output = -10dBm
SELECT
OUTPUT / increment level
SELECT
OUTPUT = -9dBm / increment level
SELECT (3 times until…)
OUTPUT = -6dBm / increment level
NEXT (until…)
OUTPUT = -6dBm / save level
SELECT
OUTPUT = -6dBm / previous menu
SELECT
NETWORK CONFIG / modem output
NEXT (until…)
NETWORK CONFIG / previous menu
SELECT
CHANGE CONFIG / Network Config
NEXT
CHANGE CONFIG / Modem Config
SELECT
MODEM CONFIG / Trellis coding
SELECT
TRELLIS disabled / enable Trellis
SELECT
TRELLIS enabled / enable Trellis
MENU
(standby display)