Global Machinery Company ATBR1650-3PK - Manual (Page 3)

3
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Specifications
Operating Pressure: 75 – 120 PSI
Firing mode: Single sequential
Air Consumption: 4 – 8 CFM
Magazine Capacity: 100 Nails
Nail size: 16 Gauge T-Brad finish nails
(Head size 2.8 - 3.3mm) only
Nail lengths: 25mm – 50mm
Tool Weight: 1.7kg
Air Inlet: 1 ⁄
4
" PT
Tool Dimensions: 304 x 77 x 254mm
Introduction
Your new GMC air tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Air Tool. Take
special care to heed the Cautions and Warnings.
Your GMC air tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.