Global Machinery Company ATBR1650-3PK - Manual (Page 33)

3
Specifications
Operating Pressure: 0.5–0.8Mpa (75–120 PSI)
Firing mode: Full sequential
Air Consumption: Minimum 6 CFM
Magazine Capacity: 90 Nails
Nail Size: 8 – 10 Gauge
34° Paper Collated
Clipped Head Framing Nail
Nail Length: 50mm – 90mm
Magazine Angle: 34°
Nail Head Type: Clipped Head
Tool Weight: 3.9kg
Nails
Plain shank: 2.87 - 3.33 Shank Diameter
Ring shank: 2.87 - 3.33 Shank Diameter
Screw shank: 2.87 - 3.33 Shank Diameter
50 - 90mm Length
� � � �
� � � �
� � � � � � � � �
� ��� � � � ��� ��
� � � � � � �
� ��� � � ��� ��
� �
� � ��� �
�
�
�
�
��
��
�
��
�
�
�
�
��
��
��
��
�
�
�
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Introduction
Your new GMC air tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Air Tool. Take
special care to heed the Cautions and Warnings.
Your GMC air tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.