Geemarc Jupiter 50 - Manual (Page 18)

CALLER ID SYSTEM OPERATION
REVIEWING CALL RECORDS
Use S and T buttons to browse your caller list. If the incoming
number is more than 13 digits, an arrow sign will appear in the right
corner of the LCD, press S or T button once to review the other digits.
Press S and T buttons again to pass to next call. At the end of the call
record list the LCD will display END OF LIST message.
Note: The storing capacity of your Jupiter50
unit is up to 66 Call Records. When the memory
gets full and a new call comes in, the oldest
record will automatically drop off to make room
for the New Call Record. In order to leave more
room in your storing memory for new incoming
call records, delete old or unnecessary records.
REMOVING RECORDS FROM CALLER LIST
In the ON-HOOK position select the number you wish to remove using
S and T buttons, then press X button. The LCD will show: DEL? Press
X button again to validate your choice and the number will be removed
from your caller list. Press any other button to exit.
If you decide to remove all the records from the list, press and hold
X
button until the LCD shows ALL DEL? Press X button again and the LCD
will show NO CALL. Press any other button to exit.
18