Geemarc Jupiter 50 - Manual (Page 4)

INSTALLATION
CONNECTING THE ADAPTOR
Connect the adaptor plug to the adaptor socket located on the back
of your Jupiter50 next to the line cord socket. Then connect the
adaptor to the wall socket (classified “hazardous voltage” according
to EN60950 standard). Please choose an adaptor wall socket near
your line plug to enable you to unplug the adaptor quickly in case
of a problem.
Note: The adaptor is required for the telephone to work
properly. Batteries are necessary in case of network power
failure. If the adaptor is accidentally unplugged (or in case
of power failure) and the batteries are empty or not in place,
restricted phone features only will work (make a call or
answer incoming call).
4