Galaxy Metal Gear 65 User Manual
Page 116
Galaxy 65 User Guide
96
You can perform other configuration functions from either SM and have the same changes made
automatically on the other SM:
• Managing pool spares
• Configuring host channels
• Configuring disk channels
• Configuring the following Galaxy 65 Subsystem settings:
– Alarm mute
– Lock cache
• Configuring the following disk settings:
– Write-back cache
– SMART
– Enclosure management processor (EMP)
B.1 Accessing the Disk Array
Administrator Using the RS-232
Serial Port
You can access the Disk Array Administrator software using the RS-232 serial port. You must use a
straight-through serial cable. You cannot use a null modem cable.
Configure the RS-232 port in your terminal emulator software using the following settings:
Set the communications parameters for the terminal program as follows:
Setting
Value
Terminal Emulation
VT-100 or ANSI (for color support)
Font
Terminal
Translations
None
Columns
80
Setting
Value
Baud Rate
115,200
Data Bits
8
Stop Bits
1
Parity
None
Flow Control
Software (XON/XOFF) or None
Connector
COM1 (typically)