Galaxy Metal Gear 65 User Manual
Page 184
Galaxy 65 User Guide
164
D.5 Capturing the Event Log, Hardware,
and Configuration Information
You can capture and save the following information to a file on your hard drive:
• Entire event log
• All hardware information
• All configuration information
• All debug information that is turned on.
This is useful if you want to print all of this information or attach it to an e-mail message.
The steps below use HyperTerminal as the terminal emulator software. If you use a different terminal
emulator, your procedure may be different.
To capture the event log, hardware, and configuration information:
1
With HyperTerminal up and running as your RS-232 interface terminal, from the System Menu, select
Utilities Menu and press Enter.
The Utilities Menu displays.
2
From the Transfer menu in HyperTerminal, select Capture Text.
The Capture Text window displays.
3
Enter the path and file name you want to use to store the log file contents.
Save the file with a.txt file extension.
4
Click Start.
5
Select Dump Debug Info and press Enter.
6
From the Transfer menu in HyperTerminal, select Capture Text, then select Stop.
7
To capture the same information for the other SM, repeat steps
1
through
6
from the computer connected
to the other SM.
D.6 Displaying Drive Errors and
Resetting Error Statistics
You can display drive errors for a specific drive. You know a drive has errors when you see the letter E
in the first column of the Display Drives screen.