Galaxy Metal Gear 65 - Manual (Page 179)

Monitoring System Status
159
D.4 Displaying Hardware and
Configuration Information
You can display the Galaxy 65 Subsystem’s hardware and configuration information. This is where you
can see what version of the firmware you have. Technical support personnel may request this
information.
You can display the hardware and configuration information two ways:
• Hardware information only
• Hardware and configuration information
Table 4–1 lists the configuration information that is available.
Table 4–1 Configuration information (per SM)
Group Field What displays Field What displays
HOST 0
HOST 1 Active
Channel Speed—1 Gb/s or 2 Gb/s
as set in the Disk Array
Administrator software.
Topology Loop or Point-to-Point as
set in the Disk Array
Administrator software.
Node WWN FC World Wide Name for
node.
Port WWN FC World Wide Name for
port.
Loop ID SOFT or a specific
number as set in the Disk
Array Administrator
software. Current Loop
ID Currently assigned
value or Inactive if the
FC link is not active.
FC Addr 24-bit FC address or None
if the FC link is not active. AL_PA Currently assigned
value or None if the FC
link is not active.
CAPI LUN NONE or specific number
as set in the Disk Array
Administrator software.