GE 25893 - Manual (Page 22)

22
3. If the number does not dial as shown, press the mute/format button.
Repeat if necessary, until the correct number of digits are shown.
4. Press TALK/callback to dial the number.
M
EMORY
Store up to ten 24-digit numbers in memory for quick dialing. This memory
feature is in addition to the 40 Caller ID records that can be stored in memory.
S
TORING A
N
AME AND
N
UMBER IN
M
EMORY
1. Press the memory button.
2. Press the desired memory location button (0 through 9 keys). If the
memory location is occupied, the memory location and stored name
and number appear on the screen. If the memory location is empty,
EMPTY appears in the display.
3. Press the memory button again. The display shows ENTER NAME.
4. Use the handset touch-tone pad to enter a name (up to 15 characters).
More than one letter is stored in each of the number keys. For example,
to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key
3 times for the letter I. Press the 5 key 3 times for the letter L, then press
the 5 key 3 times for the second letter L, and press the 1 key to insert a
space between the first and last name. Press the 7 key 4 times for the
letter S; press the 6 key once for the letter M; press the 4 key 3 times for
the letter I; press the 8 key for the letter T; press the 4 key twice for the
letter H.
5. Press the memory button again to save your selection. The display
shows ENTER NUMBER.
6. Use the handset touch-tone pad to enter the area code followed by the
telephone number (up to 24 digits, including pauses) and press the
memory button again to save your selection. The unit beeps to confirm.
7. To enter another name and number in a different memory location,
return to step 1 and repeat the process.
C
HANGING A
S
TORED
N
UMBER
Use the Storing A Number In Memory procedure to change a stored number,
and simply replace the old phone number with a new phone number.