GE 25893 - Manual (Page 33)

33
Caller ID Error Message
• The unit displays this message if it detects anything other than valid
Caller ID information during the silent period after the first ring. This
message indicates either the presence of noises on the line, or that an
invalid message has been sent from the telephone company.
A
NSWERING
S
YSTEM
S
OLUTIONS
Can’t hear messages, beep, etc.
• Adjust speaker volume.
Time/Day setting stuck at 12 a.m Mon.
• Set the time clock.
Answers on 10th ring
• Make sure answering system is turned on.
• Memory may be full. Erase some messages.
Incoming messages are incomplete
• Was an extension phone picked up as a message is received
• Memory is full. Erase some messages.
• Did you accidently press play/stop button during playback and stop the
message ?
Won’t respond to remote commands
• Must use tone-dial phone.
• Must enter correct security code.
• Did unit hang up? If you take no action for a period of time, it
automatically hangs up.