Gateway Flat Panel Television - Manual (Page 28)

24
Chapter 2: Connecting Components
www.gateway.com
Using coaxial (RF)
To connect your VCR using coaxial (RF) audio and video:
1
Connect the “output to TV” (RF out or Antenna out) jack on the back of
your VCR to the ANT jack on the back of your plasma TV.
2
Select TV using the INPUT button on the front of your plasma TV.
If you have an off-air antenna or cable box, connect your off-air antenna or
cable TV cable to the ANT connector on the back of your VCR.
Warning If an outdoor antenna or cable system is connected to your
plasma TV, make sure that the antenna or cable system
is correctly grounded. For more information, see
“Television antenna connectors protection (for systems
fitted with TV/cable TV tuner cards)” on page 55.
09359.book Page 24 Wednesday, July 30, 2003 9:01 AM