Gateway Flat Panel Television - Manual (Page 31)

27
Connecting an external receiver or amplifier
www.gateway.com
Connecting an external receiver or
amplifier
You can connect an external receiver or amplifier to your plasma TV. Your
plasma TV is equipped with a external speaker switch that can automatically
send a remote turn-on/off signal to an external receiver or amplifier.
To connect your external receiver or amplifier:
1
Connect the red (R) and white (L) audio jacks on the back of your external
amplifier or receiver to the AUDIO OUT jacks on the back of your
plasma TV.
2
If your external amplifier or receiver accepts remote turn-on/off signals,
connect the external speaker switch. Not all external amplifiers or receivers
can accept remote turn-on/off signals.
09359.book Page 27 Wednesday, July 30, 2003 9:01 AM