Gateway Flat Panel Television - Manual (Page 42)

38
Chapter 3: Adjusting Your Plasma TV Settings
www.gateway.com
PIP/POP PIP. Turns PIP mode on or off. When PIP is
turned on, you can display two pictures at one
time. One picture is displayed on the full screen
and the other picture is displayed in a small
window. The picture on the full screen is the main
picture. The picture in the window is the
sub-picture.
You can use PIP mode if your video input source
is set to TV, AV, S-Video, Component 1, or
Component 2 and the video input source is 480i
or lower (such as a non-progressive DVD player).
PIP mode does not work with component video
input sources higher than 480i (such as an
HDTV set-top box or progressive DVD player),
RGB, or DVI video sources.
SOURCE. Changes the video input source of the
sub-picture when PIP is turned on.
POSITION. Moves the sub-picture within the
screen.
FIXED lets you use the H-LOCATOR and
V-LOCATOR options to place the sub-picture in
one of the four corners of the screen.
VARIABLE lets you use the H-LOCATOR and
V-LOCATOR options to move the sub-picture
anywhere within the screen.
H-LOCATION. Moves the sub-picture left or
right.
V-LOCATION. Moves the sub-picture up or
down.
SWAP. Swaps the picture and the sub-picture.
OSD Menu Description
PICTURE SOUND PIP/POP TV OTHER
SELECT ITEM ADJUST VALUE
PIP
SOURCE
POSITION
H-LOCATION
V-LOCATION
SWAP
POP
SOURCE
SCREEN RATE
SWAP
OFF
TV
FIXED
RIGHT
TOP
DISABLE
OFF
TV
FULL
DISABLE
09359.book Page 38 Wednesday, July 30, 2003 9:01 AM