Stovax 7126 - Manual (Page 20)

20
INSTALLATION INSTRUCTIONS
3.4 To remove the baffle:
• Lift the front edge to clear the support bars
• Pull the baffle forward to disengage the rear edge from
the location above air inlet holes
• Rotate the baffle and remove through the door opening.
• Replace in reverse order
3.5 It is important to remove the clean baffle system to ensure
the flue ways are clear of soot and debris and to ensure the
safe and efficient operation of the stove. The frequency of
cleaning will depend on the stove operating conditions.
3.7 The baffle system is designed to give safe and efficient
operation of the stove. Replace damaged baffles
immediately.
3.8 Do not modify the baffle system.
4. REMOVAL OF THE FIRE BRICKS
4.1 Remove the fire bricks as part of the routine maintenance.
This can be carried out without the use of tools.
PR7082
4.2 Allow the appliance to cool fully before removing firebricks.
4.3 Take care when handling, as bricks can become fragile after
use. Life span depends on the type of fuels burnt and the
level of use.
• Replace damaged bricks as soon as possible
4.4 To remove bricks:
• Remove side bricks
• Replace in reverse order
1. REMOVAL OF THE DOOR
1.1 To remove the door:
• Open and lift free of the hinge blocks on the side of the
door
• Lie the door face down on a soft flat surface to protect
the paint work and glass
2. REMOVAL OF THE LOG GUARD
2.1 To remove the Log guard:
• Lift Log Guard clear of the supporting brackets
• Rotate to clear the sides of the door opening.
Do not use appliance without the log guard in position.
3. REMOVAL OF THE BAFFLES
3.1 The appliance is fitted with a baffle in the top of the
firebox to maintain efficient combustion.
3.2 Allow the appliance to cool fully before removing baffle
system.
Stockton 7
PR7555
Lower Baffle
Upper Baffle
Stockton 8
PR7554
Lower Baffle
Upper Baffle
3.3 Remove the Log Guard from the appliance to give access
to the firebox.