After first 50 hours of use, Weekly – Grizzly H4517 User Manual
Page 15
Model H4517/H4518 Air Compressors
-13
-
After First 50
Hours of Use
After the first 50 working hours or 30
days, whichever comes first, the follow-
ing maintenance should be done
.
1.
Replace the oil in the crankcase with
compressor oil or use ISO 100 or SAE
30W viscosity, non detergent type oil.
2.
Check to make sure that all the fittings
are tight.
3.
Remove the air filter foam element
shown in
Figure 11
and rinse it out
with water. Allow it to dry and re-
install.
Figure 11.
Air filter foam element
4.
Blow out any dirt that has accumulat-
ed between the cylinder cooling fans.
If the compressor is used on a daily
basis, perform the following checks
each week.
1.
Rinse the air filter foam element in
water.
2.
Check for loose bolts or fittings.
3.
Clean off all foreign material from
cylinder head, motor, fan, air lines,
exhaust pipe, couplers and frame.
4.
Check air lines and connectors to
make sure they are in good condition.
Weekly