Gateway Tablet PC - Manual (Page 236)

226
Chapter 15: Upgrading Your Tablet PC
www.gateway.com
12
Gently push the module down until it clicks in place.
13
Replace the memory bay cover and replace the cover screws.
14
Insert the battery, then turn your tablet PC over.
15
Reconnect the optional FlexDock.
16
Connect the power adapter and modem and network cables, then turn on
your tablet PC.
17
To check that the memory module has been installed successfully, tap Start ,
My Computer , then tap View System Information . The General tab shows the
amount of memory now installed in your tablet.
Important Use only memory modules designed for the
Gateway Tablet PC.
Important If the amount of memory shown and the memory you have
just installed differ, the memory module may not be seated
correctly. Remove the module and repeat the procedure.