GE DR-1200 - Manual (Page 14)

Mounting the Unit Rugged Dome Installation Manual
14 1038346B / February 2003
1) Remove the three mounting screws from the pendant of the
mounting bracket.
2) Let the housing cover drop down and rest on the hinge.
3) Feed the cables through the bracket.
4) Slide the housing into the pendant of the mounting bracket.
5) Line up the three holes on the bottom of the housing with the three
corresponding holes in the bracket.
6) Attach the housing to the bracket using the three mounting screws.
To make cable connections, see section 3.